Reliance Controls THP205 Sump Pump Alarm and Flood Alert

Reliance Controls THP205 Sump Pump Alarm and Flood Alert Review

Reliance Controls THP205 Sump Pump Alarm and Flood Alert Feature

• Reliable and loud sump pump/flood alarm
• Equipped with a 105-decibel alarm
• Includes wall-mounting hardware
• UL listed for safety and standards
• Backed by a one-year manufacturer's warranty

The Reliance Controls sump pump alarm and flood alert comes complete with a 60-inch water sensor wire. For maximum versatility, the kit includes a weighted probe tip that can optionally be suspended at any level to detect rising water. The sensor tip features a suction cup mount that can be affixed to any hard, non-porous surface, such as a toilet tank, bathtub, or tile floor. Designed to protect your investments, as soon as water is detected an extra loud 105-decibel alarm sounds. The alarm includes all necessary wall mounting hardware, and a 9-volt battery is required for operation (battery not included). The alarm comes backed with a 1-year limited manufacture's warranty. Emits an extra-loud 105dB alarm when water rises to dangerous levels in sump crock or is detected on floor. Includes 60in. wire sensor which can be suspended in sump crock or attached to floor, bathtub or toilet tank. Battery operated. Recommended Use: Alarm, Senses: Water, Decibel Rating: 105, Power Supply: Battery, Battery Type: 9V, Battery Included: No, Compatible With: Sump and bilge pumps, Low Battery Indicator: Yes, Mount Type: Wall, Single, Pair, or System: Pair

Wayne PC2 115-Volt 340 GPH Portable Transfer Water Pump, Bronze

Wayne PC2 115-Volt 340 GPH Portable Transfer Water Pump, Bronze Review

Wayne PC2 115-Volt 340 GPH Portable Transfer Water Pump, Bronze Feature

• Heavy-duty bronze plated pump housing for durability
• Portable pump for household and utility applications
• Removes water down to 1/8-inch of surface when water suction attachment is connected
• Pumps up to 310-gallons of water per hour
• Discharge threaded to accept standard garden hose

The Wayne 115V transfer pump is a portable, lightweight pump that is ideal for household use. Flow (GPH): 310, Volts: 115, Self-Priming: Yes, Volute: chrome-plated bronze volute

Liberty Pumps 404 1/3 HP, 115V Residential Drain Pump

Liberty Pumps 404 1/3 HP, 115V Residential Drain Pump Review

Liberty Pumps 404 1/3 HP, 115V Residential Drain Pump Feature

• Maximum discharge head of 20-Foot
• QuickTree technology allows quick inspection and removal of float switch without disconnecting the plumbing
• Pumps up to 37 GPM
• 3/8-Inch Solids-Handling
• 10-Foot 3 wire power cord with grounded plug

1/3 HP Resident Drain Pump Short Profile

EMERGENCY SUMP PUMP (Glentronics BWE)

EMERGENCY SUMP PUMP (Glentronics BWE) Review

EMERGENCY SUMP PUMP (Glentronics BWE) Feature

• The Basement Watchdog Emergency Sump Pump System

Pumps up to 33.3 GPM, or 16.7 GPM at a 10' lift. Runs over 6 hours continuously on a single charge with the Basement Watchdog standby battery, model No. 30HDC1405 (not included). Monitoring system alerts you when battery is discharged or defective, terminals are corroded, pump has been activated, AC power is out, or charger is unplugged. Exclusive fluid sensor alerts you when the battery needs water. Float switch is compact, dependable, and will not get in the way of the main pump. 1 year warranty.

Liberty Pumps PC257-441 1/3-Horse Power PC-Series Sump Pump Combo, Models 257 and 441

Liberty Pumps PC257-441 1/3-Horse Power PC-Series Sump Pump Combo, Models 257 and 441 Review

Liberty Pumps PC257-441 1/3-Horse Power PC-Series Sump Pump Combo, Models 257 and 441 Feature

• 1/3 horse power primary pump with maximum discharge head of 23-Foot
• Back-up pump with a maximum discharge head of 23-Foot
• Ready to connect to 1-1/2-Inch discharge
• Compact profile will fit minimum 15-Inch Diameter sump pits
• Offers 5 stage battery charging and protection from battery burn-out or overcharging (12V deep cycle battery not included)

Liberty Pumps 1/3HP Sump PumpSKU: PC257-441A fully assembled pump combination that features a primary 115 volt sump pump and the model 441 battery back-up pump. Available with the 237, 257 or 457 sump pump.1/3 or 1/2 hp.1/2" Discharge3/8" - 1/2" Solids Handling Images may not reflect the actual product delivered and should be used only as a general guide. Dimensions, colors/finishes, design, and style may vary.

Advanced Drainage Sy. 1537ADL Sump Pump Lid

Advanced Drainage Sy. 1537ADL Sump Pump Lid Review

Advanced Drainage Sy. 1537ADL Sump Pump Lid Feature

• sump pump accessory lid well

Black heavy duty polyethylene. Enhanced dimensional tolerances, partial turn secure lid safety feature, in place housing for self tapping screws, knockouts, discharge, power cord, and vent. Lid size: 19''.

Flotec FP0S1300X-03 Tempest 1/6 HP 1,470 GPH Utility Submersible Pump

Flotec FP0S1300X-03 Tempest 1/6 HP 1,470 GPH Utility Submersible Pump Review

Flotec FP0S1300X-03 Tempest 1/6 HP 1,470 GPH Utility Submersible Pump Feature

• Powered by oil cooled 1/6 Hp motor
• The motor is 115 volt, 60 Hz, single phase 5.0 amp with automatic thermal overload protection
• Pumps 1,470 gallons per hour
• Pump requires a minimum water depth of 1/2" for start-up
• Pumps down to within 3/16" of the pump base

FLOTEC 1/6 H.P. SUBMERSIBLE UTILITY PUMP - This non-corrosive, high strength thermoplastic utility pump is lightweight and portable. Ideal for pumping basements, cleaning aquariums, draining puddles, and pumping from cisterns and sumps. Bottom screened inlet. Pumps to 1320 GPH. Oil-cooled motor has automatic overload protection. Pumps to 3/16 depth. 8 ft.grounded, replaceable power cord. Includes garden hose adapter. 1 NPT discharge. 1/6 HP, 115V motor.

Liberty Pumps CSP-457 1/2-Horse Power 1-1/2-Inch Discharge 450-Series Crawl Space Sump Pump Kit

Liberty Pumps CSP-457 1/2-Horse Power 1-1/2-Inch Discharge 450-Series Crawl Space Sump Pump Kit Review

Liberty Pumps CSP-457 1/2-Horse Power 1-1/2-Inch Discharge 450-Series Crawl Space Sump Pump Kit Feature

• Includes a 1/2 horse power sump pump with VMF switch
• Includes a 16.5 x 15-Inch perforated polyethylene sump pit with cover
• Includes a 24-Foot x 1-1/4-Inch flexible polyethylene hose
• Maximum discharge head of 34-Foot
• System is unassembled

Liberty Pumps 1/2 HP Submersible Sump PumpSKU: CSP-457Unassembled sump pump kit features a compact perforated basin, 237 or 457 sump pump and hose kit. Applications include crawl spaces, low lying areas around foundations or anywhere water may accumulate.1/3 or 1/2 hp.1/2" Discharge3/8" Solids Handling Images may not reflect the actual product delivered and should be used only as a general guide. Dimensions, colors/finishes, design, and style may vary.

Flotec FPSC3250A 1/2 HP Submersible Cast Iron Sump Pump

Flotec FPSC3250A 1/2 HP Submersible Cast Iron Sump Pump Review

Flotec FPSC3250A 1/2 HP Submersible Cast Iron Sump Pump Feature

• Pumps up to 4680-Gallons an hour
• Lifts up to 28-Feet
• 10-Feet grounded power cord
• 1-1/2-Inch discharge
• Can be used in a narrow 10-Inch diameter sump basin

Automatic submersible cast iron sump pump Extremely quite operation Heavy duty cast iron and stainless steel construction with screened inlet Vertical float switch can be used in 10 inch diameter or larger sump basin 5 year warranty Maximum pumping capacity to 4680 gallons per hour 1-1/2 inch discharge pipe size 115 volt overload protected motor

Little Giant WRS-6 Drainosaur Tank and Pump Combination System

Little Giant WRS-6 Drainosaur Tank and Pump Combination System Review

Little Giant WRS-6 Drainosaur Tank and Pump Combination System Feature

• Pre-assembled for easy installation
• 5 Gallon tank size
• Includes two 1-1/2-Inch MNPT x 2-Inch slip adapters for inlet and discharge
• Includes one 2-Inch MNPT x 1-1/2-Inch slip adapter for vent
• Cylindrical polypropylene tank

Little Giant WRS-6 1/3 HP Drainosaur Water Removal System, 9' Power Cord (506055) Includes 5-gallon polypropylene tank. Tank lid has 1 1/2" FNPT (38.1mm) side intake port, 1 1/2" FNPT (38.1mm) top discharge port, and 2" FNPT (51mm) top vent port. Easy-to-remove filter trap. Also includes 3/10 HP automatic submersible sump pump with 8' (2.4m) power cord and 3-prong grounded plug; and 1 1/2" (38.1mm) diameter pipe from pump to lid. Basin is IAPMO approved. Little Giant WRS-6 1/3 HP Drainosaur Water Removal System, 9' Power Cord (506055) Features: 3/10HP Shaded Pole Motor 46 GPM/174 LPM 18'/5.5m Maximum head Intermittent Liquid Temp. up to 125 F 1 1/2" FNPT (38.1mm) Discharge Epoxy coated cast iron housing Polycarbonate Cover Polypropylene Volute Nylon Impeller Carbon/Ceramic Shaft Seal Upper and lower, Sintered sleeve bearings Automatic Operation Diaphragm switch Activator Switch on - 7" - 10"/17.8cm - 25.4cm Switch off - 1" - 4"/2.54cm - 10.2cm 115V, 50/60Hz, 9 amps, 8' (2.4m) power cord IAPMO Approved Basin Little Giant WRS-6 1/3 HP Drainosaur Water Removal System, 9' Power Cord (506055) Specifications: Flow 2750 ft. @ 5' of Head Cord Length 8' Shut Off 18' Voltage 115 Hertz 50/60 Amps 9 Watts 720 Weight 26 Height 15.56 Width 14.5 Length 14.5

Wayne CDU790 1/3-Horsepower Cast Iron Submersible Sump Pump

Wayne CDU790 1/3-Horsepower Cast Iron Submersible Sump Pump Review

Wayne CDU790 1/3-Horsepower Cast Iron Submersible Sump Pump Feature

• Cast iron pump housing for durability
• Mechanical float switch provides reliable operation and allows installation in sump basins 11" in diameter or larger
• Top suction strainer filters debris and protects pump from clogging
• High capacity 1-1/2" NPT discharge
• Heavy duty oil filled motor for long life

Cast iron pump housing for long life and quiet operation. Compactly designed for small sump pits. Two pole mechanical float switch provides on-off action for many years of safe, reliable service. Overload protection keeps motor from over-heating. Permanen tly lubricated ball bearing never needs oiling. Unitized shaft seal for long life. Top suction strainer stops foreign particles before they can clog the pump. Thermoplastic top assembly will not rust or corrode. Easy to install. 10" minimum sump diameter; 9" on-level; 3-1/2" off-level. 1-1/4" discharge.

Little Giant SCV114 1-1/4-Inch Plastic Sump Pump Check Valve

Little Giant SCV114 1-1/4-Inch Plastic Sump Pump Check Valve Review

Little Giant SCV114 1-1/4-Inch Plastic Sump Pump Check Valve Feature

• Check valve
• Plastic
• 1-1/4 inch

Little Giant SCV114 Check Valve (14942901) No matter what division of Little Giant, we have always been proud in supplying you some of the latest innovations within the various industries we serve. We achieve our continued success by listening to customers and incorporating the highest quality standards to our latest ideas. Little Giant SCV114 Check Valve (14942901) Features: For use with most sump pumps 1 1/4" x 1 1/4" Slip-On Style

Little Giant 554425 VCMA-20ULS Condensate Removal 1/30 HP Pump with Safety Switch

Little Giant 554425 VCMA-20ULS Condensate Removal 1/30 HP Pump with Safety Switch Review

Little Giant 554425 VCMA-20ULS Condensate Removal 1/30 HP Pump with Safety Switch Feature

• Flow: 80 GPH at 1' lift
• Voltage: 115
• Shut Off: 20 feet
• 3 inlet drain holes
• cCSAus listed

The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation. Fully Automatic, new generation float arm for enhanced reliability. Suitable for high-efficiency, gas-furnace condensate. 3 drain holes with 20ft. shut off head and 8.7 PSI. Capable of drawing 70 GPH @ 5ft.. Intermittent Liquid Temp. up to 120deg F. Little Giant Pump Company once again defines state-of-the-art in pump design. UL and CSA listed. 1-year limited warranty. Flow (GPH): 70, Volts: 115, HP: 1/30, Max. Total Head (ft.): 20, Max. Suction Lift (ft.): 5, Max. PSI: 8.7, Volute: Glass-filled Flame Retardant Polypropylene, Impeller Shaft: Glass-filled Flame Retardant Polypropylene, Power Cord (ft.): 6, Thermal Overload Protection: Yes

Parts 2O FP18-15BD-P2 Sump Pump Float Switch

Parts 2O FP18-15BD-P2 Sump Pump Float Switch Review

Parts 2O FP18-15BD-P2 Sump Pump Float Switch Feature

• Piggyback for ease of replacement
• Can convert utility pumps into automatic

Fits submersible & pedestal pumps thru 1/2 Hp. 10' power cord length. Includes mounting strap.

Wel-Bilt Submersible Pump - 21.13 GPM, 1/8 HP, 1in.

Wel-Bilt Submersible Pump - 21.13 GPM, 1/8 HP, 1in. Review

Wel-Bilt Submersible Pump - 21.13 GPM, 1/8 HP, 1in. Feature

• Clog-preventing, vortex-style impeller
• Durable epoxy powder-coat finish and stainless steel rotor shaft
• Dimensions: 6in.W Bottom x 4in.W Top x 10 1/2in.H
• Not related to WELBILT products of Enodis companies

Wel-Bilt Submersible Pump drains pool covers, flooded cellars and boat bilges. Maximum lift is 23ft. Screened inlet draws water from within 1/8in. of the bottom. Tough, non-corrosive polypropylene pump body. 110 Volt Motor has built-in thermal overload. Includes 1/2in., 3/4in. and 1in. hose adapters. 1in. outlet. Not for continuous use; short-duty pump only. HP: 1/8, Flow (GPH): 1,268, Volts: 110, Amps: 2.5, Max. Suction Lift (ft.): 23, Suction Type: Bottom, Discharge Port (in.): 1, Pump Housing: Polypropylene, Impeller Shaft: Vortex, Power Cord (ft.): 10, Dimensions L x W x H (in.): 6 x 4 x 10 1/2

Hydromatic D-A1 Submersible Sump Pump

Hydromatic D-A1 Submersible Sump Pump Review

Hydromatic D-A1 Submersible Sump Pump Feature

• Carbon/ceramic mechanical seal
• Oil filled motor with automatic reset thermal overload protection
• Uses a single rowball bearing construction
• Piggy-back plug available for easy maintenance and replacement

Submersible residential sump pump, 3/8" solids handling, 1550 RPM, 1-1/2" NPT discharge, built-in overload. Automatic operation, with piggyback switch: D-A1 = pressure diaphragm switch. D-A1 switch settings: Turn-on = 7-7/8"; Turn-off = 3-3/8".

Basepump RB 750 Water Powered Backup Sump Pump

Basepump RB 750 Water Powered Backup Sump Pump Review

Basepump RB 750 Water Powered Backup Sump Pump Feature

• Extremely reliable, very powerful, water powered backup sump pump system
• No battery to wear out or maintain.
• No charger to plug in or monitor.
• Automatic, independent system from the primary sump pump
• Mounted on the ceiling, high above the sump, clean and dry.

Uniquely designed backup sump pump that is mounted on the ceiling above the sump, not in the sump itself; keeping it clean and dry until needed. Uses water to pump water! This design means greater efficiency and high pumping rates. Connects directly to your home water supply and discharges to exterior or into existing discharge from main pump. High quality, durable materials. Uses completely hydraulic float and valve system for reliable operation. Suitable for use with Radon covers. Reliable Back Up Sump Pump for most homes. Fact is: a back-up sump pump is needed in every home.